Street art hits the wrist – Manufacture Royale ADN Street Art Collection (Photos, Specs and Price)

By rolex
April 5, 2021
3 min read

After vivid street artist coordinated efforts from Richard Mille and  TAG Heuer , free very good quality brand Manufacture Royale has now unveiled its own street art-motivated model. The Manufacture Royale ADN Street Art Collection stands apart for its interesting design, similar to the remainder of the ADN assortment, and now adds a portion of shading, ‘dressing up’ its development. Because of the graphic configuration cycle, and water printing, every last one of these intense watches is unique.

The Manufacture Royale ADN (DNA in French) Street Art Collection is a developing spatial engineering. The construction of its development depends on covering squares, presently charged by striking tones. This rakish, hued, outside skeleton, outlines the parts of the development underlining the balance of the barrel and tourbillon confine at 6 o’clock. This cutting edge development is enlivened by the artful dance of a one-minute tourbillon whose enclosure is strangely square.

The water move strategy to make the spray painting on the development comprises in absorbing the scaffolds a water shower in which a film with a theme has been put. When eliminated from the shower, the components are washed and settled. Subsequently, the example is sturdy and one of a kind for each and every piece.

Powering the Manufacture Royale Street Art is the type MR10 manufactured in Vallorbe, where the brand is headquartered. This 36mm, physically twisted development, is the 10th from the brand. The equilibrium vibrates at 3 Hz and the equilibrium wheel highlights change screws. The managing organ is a one-minute tourbillon, with a fairly surprising yet exceptionally befitting, square enclosure. The origin holds sufficient energy for 108 hours of self-rule. The barrel that houses the fountainhead, situated at 12 o’clock, has a skeletonized cover with a network pattern.

The MR10 development is housed in the ADN case ( read our article about the Manufacture Royale ADN from Baselworld 2017 here ). Created in steel, this intense case development is 46 mm in distance across and comprises no less than 67 components. The bezel is held set up by 6 screws, and versatile hauls rotate between brancards (which embrace the side of the case) bringing about improved ergonomics. This way it folds around the wrist, and notwithstanding the amazing measurements, it tends to be worn by men and even ladies with a more modest wrists and still be very comfortable.

The Manufacture Royale ADN Street Art is matched with a delicate elastic or cowhide tie, and can be shut with a security collapsing clasp. Each piece is one of a kind and the plan can be customized upon demand. MSRP is CHF 70,000 Swiss Francs.

Technical particulars – Manufacture Royale ADN Street Art Collection

  • Case: 46 mm x 11.72 mm steel case – sapphire gem with antireflective covering on the two sides – sapphire caseback – 3 ATM/30 m water resistant
  • Movement: type manufacture Royale MR10 mechanical with manual winding – 36 mm – 108 h power save – 21’600 vibrations/h – 17 gems – hours, minutes and tourbillon
  • Strap: elastic lash with collapsing buckle
  • Price: CHF 70,000

For more data, if it’s not too much trouble, visit